Navigation & Built-in Cam Updates

Notifications

Type : Built-in Cam
September 2022 Built-in Cam Update
Register Date : 14-Sep-2022
Update Guide

Provides the latest update software for built-in cams in August 2022.

  • Targeted Model
    • IONIQ 5

  • How to Use
    1. Download the update file for each model to USB memory from the ‘Built-in Cam Update>Download’ menu.
      Update files will not run on your PC. Download to USB memory without decompression and proceed with vehicle update without any additional procedures

    2. Insert the downloaded USB memory into the built-in cam USB terminal of the vehicle to proceed with the update.
      Connection is required to a built-in cam-only USB terminal and the location of the built-in cam USB terminal for each vehicle type is as follows
    Model
    		USB terminal location
    IONIQ 5
    		Top right of glove box
    ※ For more information on how to update, please refer to the ‘Built-in Cam Update>How to Update’ menu
    Depending on the version of software installed, the update menu may have different paths



Built-in cam updates

Provides updates that reflect built-in cam enhancements. Please check ‘Check the latest version information for each model’ at the top of the notice.
※ The image inserted below may differ from the actual vehicle's screen

  • Improved usability of built-in cam menu while driving
    • Usability has been enhanced by making the built-in cam menu available while driving. However, video playback and mobile phone connection functions are limited for safety while driving

      [Status of stop]
      [Status of stop]
      [Limitation of video playback in driving state]
      [Limitation of video playback in driving state]

    • If there is no operation for a certain period of time while driving, the built-in cam will automatically shut down



  • Improved usability of time lapse recording
    • At the top of the video list, ‘Stop Recording Button’ and ‘Recorded Video Playback Time’ are added to improve usability


  • Improved graphic image
    • Piston-style animation was applied when saving/deleting images, just like the navigation system, and some other graphic images were improved

  • Change the parking recording time setting when initializing the system
    • When the system is initialized, the recording time during parking has been changed from the previous 2 hours to the maximum recording time (12 hours)



Precautions

  • Please proceed with the update with the officially distributed update file. If you change the file name of the update file, it will not be updated normally, and the built-in cam may not work properly

  • When updating to USB memory, it is recommended to format the USB memory before copying the update file
    • USB memory supports file systems formatted in FAT16, FAT32, NTFS, and exFAT formats and in some cases, damaged USB memory products may not work properly

  • When downloading the file, check the vehicle name accurately. When downloading update files of other models, the update may not proceed or the built-in cam may not work properly

  • Disconnect the USB removable disk after the file copy is completely finished on your PC. If you disconnect while copying a file, the file may become corrupt and may not be updated normally

  • For in-vehicle update methods and precautions, refer to the ‘Built-in Cam Update>Update Method’ menu

  • We recommend keeping the navigation, built-in cam software up to date.
    If the navigation, built-in cam software is not the latest version, there may be differences in graphics or functionality may not work properly

  • If the built-in cam is not functioning properly due to an unexpected error during the update, please visit the nearest service center